-
R100/Rx2 8pc Tail Lamp Rubber Gasket Set
Pre orders now available from 1st June 2024
ETA ON STOCK is September 2024
X4 Fit Lens to Lamp
x4 Fit lamp to body
New & Perfect for your restoration or project
$89.00 -
CHROME Alloy Door Lock Knob – M Logo ( Pair )
What better way to show off your interior with a set of Rotor Door Lock Knobs
Chromed Billet – Machined with M emblem engraved
Suitable for all models with M4 Thread
SOLD AS A PAIR ( 2pcs )
2DOOR CAR = 1 SET
4DOOR CAR = 2 SETS
Made in house.
$80.00 -
12A Black Side Cover Plate – BLANK
12a Side Cover Plate
Black – BLANK
$45.00 -
Capella RE Tee Black
Black Tee
Quality made Garments
All hand made/printed per order
$50.00Capella RE Tee Black
$50.00 -
MazdaRx2 Badge
MazdaRx2 Badge
Sold as a Pair ( 2pcs )
High quality REproduced replicas
All factory features including Pins for installing in factory locations.
$130.00MazdaRx2 Badge
$130.00 -
13BEE Honeycomb Black CAS Cover
Black Stainless Steel
Laser Engraved logo
Stainless Screws included
$40.00 -
R100/Rx2 Tail Light Lenses – 4pcs
Perfect REplacement for your old and damaged plastic lenses
Sold as 4 lenses
x 2 Orange
x 2 Red/Clear
$175.00 -
13BEE Honeycomb Black SS Flywheel Cover 1 Bolt
Black Stainless Steel
With Laser Engraved logo
Will fit all 13B Models where 1 Bolt is required to fit.
Includes Stainless Bolt
$35.00 -
Rx2/Capella Weld in Panels
Mazda Rx2/Capella weld in panels
Sold as a Pair ( x 1 LH x 1 RH )
Perfect for the Capella to Rx2 conversion or for rust repairs
$429.00Rx2/Capella Weld in Panels
$429.00 -
-
13B Side Bellhousing plate
polished stainless steel – suits all Series 4/5 mazda rx7 style bellhousing/rearplates
$50.0013B Side Bellhousing plate
$50.00 -
Rx7 black plate 13b cover
Rx-7 engraved – stainless bolt included.
$30.00$40.00Rx7 black plate 13b cover
$30.00$40.00 -
13B Exhaust Flange Stainless Steel
13B Stainless Steel Flange
Thick Stainless Steel
sizes available are the CUT Diameter of the holes.
With Logo Cut
Available in a range of sizes to suit your pipes
$170.00 -
MAZDA outline black CAS
old mazda logo outline font – stainless screws included
$25.00$35.00MAZDA outline black CAS
$25.00$35.00 -
Rotary Engine 12A Polished Flywheel cover
rotary engine logo – stainless bolts included.
$40.00 -
Rx2 Dash Billet CHROME Trims
You will find your original trims maybe, broken, cracked or beyond repair, in some cases missing completely!
These Billet Dash trims are a show room finish.
re-produced rx2 billet alloy dash chrome trims – sold as a pair, includes pins and clips.
If Refurbishing Dash Pad , it is recommended to supply and fit the new Chrome trims before refurbishing to get the best result.
All made in house, Australian made.
$299.00$369.00Rx2 Dash Billet CHROME Trims
$299.00$369.00 -
Rx2 Billet Alloy Chrome Gearshift Surround
CNC Machined Billet Alloy – Chromed
Full replica of the factory trim – but reinvented to be stronger and shinier.
Will only fit the Wider Gearstick console plastics – as pictured
Includes Clips and washer plate for fitment, sold separately is the Vinyl boot to suit.
Made in house, Australian made
$170.00$199.00Rx2 Billet Alloy Chrome Gearshift Surround
$170.00$199.00 -
Rx3 Outer gearshift console chrome surround
Rx3 Gearshift “Outer” Console Chrome
CNC Machined
1 Piece billet alloy – chromed
replicates all original features
clips in place, also recommend using a Gel glue to help for longer lasting
Australian made.
$189.00 -
Rx2 Handbrake Console – Vinyl Boot
New Black vinyl boot
Suits all Rx2/Capella Handbrake consoles
Modern finish yet fitting to the original interior design
includes clips
Australian made
$90.00 -
323 Polished Bumper Strips (Pair)
Sold as a pair ( 2 pcs )
replaces the black rubber strip from standard
$85.00$99.00323 Polished Bumper Strips (Pair)
$85.00$99.00 -
Black Billet Oil Cap M Mazda Hoop logo
CNC Machined
Billet Alloy
Black anodized with old school logo
Will fit all 12a / 13b motors.
$70.00$100.00Black Billet Oil Cap M Mazda Hoop logo
$70.00$100.00 -
CHROME Billet Rx4/929/Rx7 FB/FC / 626 Strut Tops – M Logo
Chromed Billet Alloy Strut Top Covers
Will Fit all Rx7 Generation 1 FB Models , all Rx7 FC Models, Mazda Rx4/929 Models and Mazda 626.
Will Fit standard suspension and those with adjustable.
M logo machine engraved
Chrome plated
Sold as a pair (2pcs)
Australian made.
$350.00 -
Rx2/Capella Gearshift + Handbrake Surround Unit
Another World First !
We have now made the Narrow Rx2/Capella Gearshift Surround Console unit & the Handbrake/E-Brake Console
These are manufactured as per OEM Units
All units are Sold as Complete – This includes the Alloy Billet Chromed trims, vinyl boots and handbrake Lense/light unit.
A real clean Factory finish , for your daily,show,drag car
$1,595.00 -
12A Housing Tag – Black Details
12A Housing Tag
Sold as a Pair ( 2pcs )
Made in House.
$40.00